Zoom H22 User Manual

 

function cannot be used together. If you set 
one of these functions to ON while the other is 
already ON, the earlier function will 
automatically be turned OFF.

 

Press the 

 

5

 

 (REC) key to set the H2 to the

recording standby condition. When you then
press the 

 

5

 

  (REC) key again to begin

r e c o r d i n g ,   t h e   p r e - r e c o r d e d   p a r t   f r o m
immediately before that point will also be
included. 

The duration of the pre-recorded part depends
on the operation mode, file format and
sampling frequency, as shown below. 

 

The H2 allows you to record a signal from
the internal or external mics or from an
external component in mono. This can be
useful for example for narration or effect
sounds, where handling the material in
mono may be preferable.

 

• The steps described below will cause the 

stereo channel signals of the internal or 
external mics or an external component to 
be mixed. The result is then recorded as a 
stereo file where the L and R channels have 
the same content.

• This function is available in stereo mode 

only.

 

At the stereo mode or 4-channel mode top
screen, press the 

 

4

 

 (MENU) key.

 

Repeatedly press the 

 

3

 

 (REW)/

 

2

 

 (FF)

keys to move the cursor to "MONO MIX" and
press the 

 

5

 

 (REC) key.

 

Use the 

 

3

 

 (REW)/

 

2

 

 (FF) keys to move the

cursor to "ON", and press the 

 

5

 

 (REC) key.

 

WAV 44.1 kHz

 

2 seconds

 

WAV 48 kHz

WAV 96 kHz

 

1 second

 

MP3

 

2 second

 

44.1 kHz

 

1 second

 

48 kHz

H2-E.fm 43 ページ ２００７年７月１１日　水曜日　午後３時１９分