Zoom A2.1U User Manual
ZOOM A2.1u
6
Controls and Functions / Connections
Module selector
Top Panel
Rear Panel
Switches between play/manual mode and edit
mode. In edit mode, the knob selects the module
for operation.
mode. In edit mode, the knob selects the module
for operation.
Serves for storing edited patches in memory.
[USB] connector
Allows you to connect the A2.1u to a
computer, for use as an audio interface.
computer, for use as an audio interface.
[BALANCED OUT] connector
This XLR connector can be used to
send a balanced line-level signal to
PA equipment, recording devices, or
similar.
send a balanced line-level signal to
PA equipment, recording devices, or
similar.
[PRE/POST]
switch
switch
Selects the point
where the signal
supplied at the
[BALANCED OUT]
connector is branched
off.
where the signal
supplied at the
[BALANCED OUT]
connector is branched
off.
[GROUND] switch
Determines whether the
[BALANCED OUT]
connector is grounded
or not.
[BALANCED OUT]
connector is grounded
or not.
Computer
Mixer
Headphones
PA system
BANK [-]/[+] keys
[STORE] key
Shows patch numbers, setting values, and other
information about operating the A2.1u.
information about operating the A2.1u.
Display
These switches serve for selecting patches, turning
effect modules on and off, controlling the tuner,
and other functions.
effect modules on and off, controlling the tuner,
and other functions.
[
W]/[Q] foot switches
In play mode and manual mode, the keys serve for
directly switching to the next lower or higher bank.
In edit mode, the keys switch the effect type for the
currently selected module.
directly switching to the next lower or higher bank.
In edit mode, the keys switch the effect type for the
currently selected module.
eA21u.fm 6 ページ ２００５年１１月４日 金曜日 午後５時２３分