Vulcan-Hart STEAMERS C24GA6 ML-136021 User Manual

— 19 —

Unit not steaming

Door leaks

Water accumulates in
compartment

Water not being
supplied to generator

Steam is exiting from
under unit

Gas supply is off

Power cord is unplugged

Power switch is off

Water supply is off

Burner control goes into 100%
lockout

Damaged door gasket

Plugged drain or screen

Drain clogged

Not leveled properly

Water supply valve is off

Water pressure low

Water filter is plugged

Generator pressure is too high

Turn on gas supply.

Plug in power cord.

Press power switch on.

Turn on water supply.

Shut off the power, wait 5
minutes, then turn power back on
to restart ignition.

If symptom persists, contact your
Authorized Vulcan-Hart Servicer.

Check door gasket for damage.
If adjustment is needed, contact
your Authorized Vulcan-Hart
Servicer.

Clear compartment cavity screen.
If symptom persists, contact your
Authorized Vulcan-Hart Servicer.

Unclog drain.

Level per instructions in this
manual.

Turn valve on.

Check water supply pressure.

Refer to water filter manual.
 If symptom persists, contact your
Authorized Vulcan-Hart Servicer.

Contact your Authorized Vulcan-
Hart Servicer.

To obtain service and parts information concerning this model, contact the Vulcan-Hart Service
Agency in your area (refer to our website, www.vulcanhart.com for a complete listing of Authorized
Service and Parts depots).

When calling for service, the following information must be available: model number, serial number,
manufacture date (MD) and voltage.