VXi VM4016 User Manual
VXI Technology, Inc.
24
VM4016 Programming
INHOUSE:REG_ENABLE
The INHOUSE:REG_ENABLE command controls the masking for REGINT. REG_ENABLE 0
means that backplane interrupts cannot be generated. If the REG_ENABLE is 1, then backplane
interrupts can be generated. If PSEUDO is set, then a write to the register at offset 0x38 also
controls the masking. Enable or disable capabilities are provided in the pseudo register interface
to allow a complete register interface. It is important to note that all letters of the command must
be provided as there is no short form for this command.
INHOUSE:REG_ENABLE <boolean>
The INHOUSE:REG_ENABLE command controls the masking for REGINT. REG_ENABLE 0
means that backplane interrupts cannot be generated. If the REG_ENABLE is 1, then backplane
interrupts can be generated. If PSEUDO is set, then a write to the register at offset 0x38 also
controls the masking. Enable or disable capabilities are provided in the pseudo register interface
to allow a complete register interface. It is important to note that all letters of the command must
be provided as there is no short form for this command.
INHOUSE:REG_ENABLE <boolean>
Where <boolean> is 0 | OFF | 1 | ON.
EXAMPLES
INHOUSE:REG_ENABLE 1
Enables the REGINT type interrupt
generation
INHOUSE:REG_ENABLE?
INHOUSE:REG_ENABLE?
Returns 1 to state that backplane
1
interrupting is currently enabled.
INHOUSE:REG_ENABLE 0
Disabling REGINT interrupt generation.
INHOUSE:REG_ENABLE?
Returns 0 to state that backplane
0
interrupting is currently disabled.