Z Microsystems SL User Manual

Doc# 27-0032UM Rev A Issued 07/05

9

To mount the channels on the front of the 

RETMA rails (in most cases), use two 10-

32 Phillips screws...

on each side to secure the Z-Lock mounts. 

Be sure to press the slide rail flat against 

the RETMA rail as you tighten the screws.

On the rear of the cabinet frame, also use 

two Phillips screws on each rail to secure. 

On the slide rails, using a screwdriver and 

wrench, tighten the slide extension rail 

screw. Repeat on each side.