Vosonic VP8860 User Manual

(

1). Scroll to the Hard Disk icon and press [ MENU ] button 

(2). Scroll down to [ Format Disk ] option and press Joystick button , then   

the format function will be performed. 

Attention:

(1) If the hard disk already contain data, please backup the data first , 

because when you partition and format a hard disk, all the data on 
that partition is permanently deleted. 

(2) The Hard Drive will be formatted as FAT format

WARNING
Under no circumstances should you try to repair the system yourself, as 
this will invalidate the warranty. Do not open the system as there is a risk 
of electronic shock.If a fault occurs, first check the points listed below 
before taking the system for repair.If you are unable to remedy a problem 
by following these hints ,consult Your dealer or 
service center. 

If using a USB port in the front of your computer, try a USB 
port in the back. Front USB ports are often from 
non-powered. 

If using a laptop computer and a docking station, try 
connecting without the docking station. 

If you cannot see the files on the device after copied files to 
VP8860 via USB from computer , You must properly 
remove ( un-mount) your VP8860 from the computer 
before disconnecting the USB cable to avoid loss of data 
or freezing the computer and VP8860 

 

If you can not find the VP8860 Hard Drive show up in 
Windows for over one minute, the Files Allocation Table 
(FAT) of Hard Drive may gets corrupted, you can use 
Format Function on the VP8860   
but note it will erase ALL of the data on your VP8860.

36