Vortech Engineering Nissan 350Z/Infinity G35Supercharger System 2003-2006 User Manual
P/N: 4NZ020-010
©2007 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
12JAN07 v4.0 Nissan 350Z(4NZv4.0)
v
Before beginning this installation, please read through this entire instruction booklet and the Street
Supercharger System Owner’s Manual (Race Owner’s Manual for the Renegade kit) which includes the
Limited Warranty Program, the Warranty Registration form and return envelope.
Vortech supercharger systems are performance improving devices. In most cases, increases in torque of
30-40% and horsepower between 45-55% can be expected with the boost levels specified by Vortech
Engineering. This product is intended for use on healthy, well maintained engines. Installation on a
worn-out or damaged engine is not recommended and may result in failure of the engine as well as
the supercharger. Vortech Engineering is not responsible for engine damage.
Installation on new vehicles will not harm or adversely affect the break-in period so long as factory break-in
procedures are followed.
Supercharger System Owner’s Manual (Race Owner’s Manual for the Renegade kit) which includes the
Limited Warranty Program, the Warranty Registration form and return envelope.
Vortech supercharger systems are performance improving devices. In most cases, increases in torque of
30-40% and horsepower between 45-55% can be expected with the boost levels specified by Vortech
Engineering. This product is intended for use on healthy, well maintained engines. Installation on a
worn-out or damaged engine is not recommended and may result in failure of the engine as well as
the supercharger. Vortech Engineering is not responsible for engine damage.
Installation on new vehicles will not harm or adversely affect the break-in period so long as factory break-in
procedures are followed.
For best performance and continued durability, please take note of the following key points:
1.
Use only premium grade fuel 91 octane or higher (R+M/2).
2.
The engine must have stock compression ratio.
3.
If the engine has been modified in any way, check with Vortech prior to using this product.
4.
Always listen for any sign of detonation (pinging) and discontinue hard use (no boost) until
problem is resolved.
problem is resolved.
5.
Perform an oil and filter change upon completion of this installation and prior to test driving your vehi-
cle. Thereafter, always use a high grade SF rated engine oil or a high quality synthetic, and change
the oil and filter at least every 3,000 miles. Never attempt to extend the oil change interval beyond
3,000 miles, regardless of oil manufacturer’s claims as potential damage to the supercharger
may result.
cle. Thereafter, always use a high grade SF rated engine oil or a high quality synthetic, and change
the oil and filter at least every 3,000 miles. Never attempt to extend the oil change interval beyond
3,000 miles, regardless of oil manufacturer’s claims as potential damage to the supercharger
may result.
6.
Before beginning installation, replace all spark plugs that are older than 1 year or 10,000 miles with
original heat range plugs as specified by the manufacturer and reset timing to factory specifications
(follow the procedures indicated within the factory repair manual and/or as indicated on the factory
underhood emissions tag). Do not use platinum spark plugs unless they are original equipment.
Change spark plugs every 15,000 miles and spark plug wires at least every 50,000 miles.
original heat range plugs as specified by the manufacturer and reset timing to factory specifications
(follow the procedures indicated within the factory repair manual and/or as indicated on the factory
underhood emissions tag). Do not use platinum spark plugs unless they are original equipment.
Change spark plugs every 15,000 miles and spark plug wires at least every 50,000 miles.
Nissan 350Z/Infinity G35
Installation Instructions
Congratulations on selecting the best performing and best backed
automotive supercharger available today... the VORTECH® supercharger!
TOOL & SUPPLY REQUIREMENTS
• Ø2.5" Hole Saw
• 1/8", 11/64" Drill Bits
• Drill Motor
• Stepless Clamp Crimping Pliers
• Seal Cutter
• Gasket Scraper
• Silicone RTV (Permatex Ultra Grey: 82194 or equivalent)
• Factory Repair Manual (Recommended)
• 3/8" Socket and Drive Set: SAE & Metric
• 1/2" Socket and Drive Set: SAE & Metric
• 3/8" NPT Tap and Handle
• Open End Wrenches: SAE & Metric
• Center Punch
• Springlock 5/16" Fuel Fitting Disconnect Tool
• 5 Quarts SH/CF Rated Quality Engine Oil
• Oil Filter and Wrench
• Flat #2 Screwdriver
• Phillips #2 Screwdriver
• Heavy Grease
• Silicone Sealer
• Drill Motor
• 1/8", 3/16" Drill Bits
• Hex Key Wrench Set
• Wire Strippers and Crimpers
• Utility Knife
• 1/8", 11/64" Drill Bits
• Drill Motor
• Stepless Clamp Crimping Pliers
• Seal Cutter
• Gasket Scraper
• Silicone RTV (Permatex Ultra Grey: 82194 or equivalent)
• Factory Repair Manual (Recommended)
• 3/8" Socket and Drive Set: SAE & Metric
• 1/2" Socket and Drive Set: SAE & Metric
• 3/8" NPT Tap and Handle
• Open End Wrenches: SAE & Metric
• Center Punch
• Springlock 5/16" Fuel Fitting Disconnect Tool
• 5 Quarts SH/CF Rated Quality Engine Oil
• Oil Filter and Wrench
• Flat #2 Screwdriver
• Phillips #2 Screwdriver
• Heavy Grease
• Silicone Sealer
• Drill Motor
• 1/8", 3/16" Drill Bits
• Hex Key Wrench Set
• Wire Strippers and Crimpers
• Utility Knife
If it has been 20,000 miles or more since your vehicle’s last spark plug change,then you will also need:
• Spark plug socket
• NEW spark plugs
• NEW spark plugs
®
ENGINEERING, LLC