Virgin Mobile Kyocera S2100 836182001579 User Manual

User Guide

9

Install the Battery

1. Hold the phone face 

down.

2. Find notch directly 

below the back cover. 
It is square. Using your 
thumbnail, lift the 
cover to remove.

3. Place the battery in the 

battery casing with the 
metal contacts facing 
toward the bottom of 
the phone. The metal 
contacts of the battery 
must make contact 
with the metal contacts of the battery 
casing.

4. Replace the battery 

door by lining up the 
notches with the 
openings at the top and 
on each side of the 
battery casing.

5. Snap the cover into 

place.

Charge the Battery

1. Connect the AC 

adapter to the 
Micro-USB jack on the 
side of the phone.

2. Plug the adapter into a 

wall outlet.

The battery icon in the 
upper-right corner of the screen tells you 
whether the phone is:

– Charging (the icon is animated)
– Partially charged 
– Fully charged 

You must have at least a partial charge in the 
battery to make or receive calls. You can safely 
recharge the battery at any time, even if it has a 
partial charge.
Note: Before removing the battery, make sure 
the phone is powered off.