Visioneer MFC7050C User Manual
M E S S A G E
C E N T E R
12-6
Printing a Fax Message
Once you print a new fax message stored in memory, it is erased
from the memory automatically.
from the memory automatically.
1
Press
Play
. After two seconds, the MFC begins to play voice
messages. Afterward, if there are fax messages in memory,
you can print them:
you can print them:
PRINT FAX?
1.YES 2.NO
1.YES 2.NO
2
To print the faxes in memory, press
1
—OR—Press
2
to exit
without printing.
Backup Printing Option
When you choose FAX: ON in the Message Center mode, all
incoming fax messages are stored in the available memory for
retrieval. Turn on this function to print backup copies.
incoming fax messages are stored in the available memory for
retrieval. Turn on this function to print backup copies.
1
Press
Function
,
1
,
7
,
2
.
BACKUP PRINT:ON
SELECT & SET
SELECT & SET
2
Press
or
to display ON (or OFF) and press
Set
.
3
Press
Stop
to exit.
Erasing Messages
If you choose to erase all fax messages, the MFC will print any
previously unprinted fax messages before erasing them from
memory. Fax messages cannot be erased individually.
previously unprinted fax messages before erasing them from
memory. Fax messages cannot be erased individually.
You can erase voice messages individually, or all at once.
To erase voice messages individually
1
Press
Play
. After two seconds, the MFC beeps and begins
message playback. Each message is preceded by one long
beep, and followed by two short beeps.
beep, and followed by two short beeps.
2
To erase a specific message, press
Erase
immediately after the
two short beeps, or while the message is playing.
ERASE THIS MSG.?
1.YES 2.NO
1.YES 2.NO
3
Press
1
to erase the message—OR—Press
2
to cancel.
4
Press
Stop
to exit.