Visioneer 1170 User Manual
62
C H A P T E R E I G H T
Using Remote Retrieval Access Code
1
Dial your fax number from a touch tone phone.
2
When your fax machine answers and beeps, immediately enter your Remote
Retrieval Access Code (159✳).
Retrieval Access Code (159✳).
3
Your fax machine signals the kinds of messages received:
1 long beep — Fax message(s)
No beeps — no messages.
4
Your fax machine then prompts you with two short beeps to enter a
command. If you wait longer than 30 seconds to enter a command, your
machine hangs up. If you enter an invalid command, your machine beeps
three times.
command. If you wait longer than 30 seconds to enter a command, your
machine hangs up. If you enter an invalid command, your machine beeps
three times.
5
Press
9
0
to reset your machine when you finish.
6
Hang up.
Remote Commands
Follow the commands below to access features remotely. When you call the fax
machine and enter your Remote Retrieval Access Code (159✳), the system will
signal you with two short beeps to enter a remote command.
machine and enter your Remote Retrieval Access Code (159✳), the system will
signal you with two short beeps to enter a remote command.
Change Paging/Fax Forwarding Setting
Press
9
5
.
then to
Turn feature off — Press
1
.
Enter Fax Forwarding — Press
2
.
Enter Paging — Press
3
.
Program Fax Forward Number — Press
4
, then retrieve Memory Status
List (see page 64).
Confirm Fax Forward Number — Press
5
.
Turn Fax Storage ON — Press
6
.
Turn Fax Storage OFF — Press
7
.