VeriFone Vx510 User Manual

V

X

5

XX

/V

X

6

XX

 I

NSTALLATION

 G

UIDE

Replace the MSAM compartment door and reinstall the screw (see 

).

The V

x

5xx/V

x

6xx supports some peripheral devices designed for use with 

electronic point-of-sale terminals.

For more information about optional devices, please contact your VeriFone 

distributor.

For the V

x

5xx, use the two ports on the back panel to connect up to two optional 

devices.

Use the following procedure to connect a PINpad or smart card reader.

Insert the RJ45-type connector on the end of the PINpad or smart card reader 

into the port on the back of the peripheral device.

To install a PINpad 101, PINpad 201, or PINpad 1000, position and insert the 
grommet to secure the cable connection.

If a cable is not already connected to the smart card reader or PINpad, insert 
the small modular plug on one end of the interface cable into the optional 
device’s modular jack.

Before connecting any peripheral device, remove the power cord from the bottom 

of the terminal and ensure that the green indicator LED is not lit. Reconnect the 
power cord only after you are finished connecting the peripheral device(s). For 
complete information about peripheral installation and use, refer to the user 
documentation supplied with those devices.

RS-232-type devices do not work on the PINpad port. PINpad-type devices do not 

work on the RS-232 port. If an optional peripheral device does not function 
correctly, check the port connection.