VeriFone Vx510 User Manual

V

X

5

XX

/V

X

6

XX

 I

NSTALLATION

 G

UIDE

Screw the barrel nut finger tight to retain the antenna.

To establish good wireless communication (uplink), vertically align the antenna 
with respect to ground and sky

 For example, if standing and holding the terminal 

horizontally, position the antenna approximately at a 90

°  angle to the unit (that is, 

pointing up from the ground). This should point the antenna directly at the sky. 

If the unit is on a flat surface (for example, a table top) position the antenna so that 
it points directly at the sky. 

If your V

x

6xx terminal has difficulties completing wireless transactions, you may 

have to replace the antenna. Use the following procedure to replace the antenna:

Remove the existing antenna from the V

x

6xx terminal:

Unscrew the barrel nut to loosen the antenna.

Pull gently on the center of the base of the antenna until it slides out of 
position.

Align the connector on the end of the new antenna with the connector on the 

end of the terminal.

Push gently on the center of the base of the antenna until it slides into 

position.

Screw the barrel nut finger tight to retain the antenna.

If an application (for example, SoftPay) is installed in your V

x

6xx unit, a signal 

strength indicator may appear on the display.