Vauxhall Combo Owner's Manual

Picture no: 12466s.tif

Always move the selector lever all the way 

in the chosen direction. Observe the gear 

or mode indicator in the transmission 

display.
Selector lever in N 

Neutral. 
Starting the engine

The engine can only be started when the 

selector lever is in N and the footbrake is 

depressed. "N" appears in the transmission 

display. If the footbrake is not depressed, 

"N" flashes in the transmission display and 

the engine will not start.
If no brake lights are operational, the 

engine will not start.

Selector lever in o (centre position)

After movement of the selector lever from 

N to position o (centre position) while the 

footbrake is depressed, Easytronic is in 

Automatic mode and first gear is engaged. 

"A" appears in the transmission display.
After the footbrake is released, the vehicle 

begins to "creep". If the footbrake is not 

depressed, "A" flashes. Start off by 

immediately depressing the accelerator 

pedal or move the selector lever back to N 

and repeat the procedure with the 

footbrake depressed.
In Automatic mode, the transmission shifts 

into other gears automatically based on 

driving conditions. 
In Manual mode, a gear can be selected 

manually by tapping the selector lever to 

the 

 or 

position. The transmission display 

indicates the current gear.
If the engine speed is too low, the 

Easytronic will automatically shift to a 

lower gear even in Manual mode. This 

prevents the engine from stalling. 

Shift to a higher gear.

Shift to a lower gear.

If a higher gear is selected when the 

running speed is too low, or a lower gear 

when the speed is too high, no shift is 

effected. This prevents the engine from 

running at too low or too high revs. 
Gears can be skipped by jogging the 

selector lever repeatedly at short intervals. 
When the vehicle is in Automatic mode, 

Easytronic shifts to Manual mode when the 

selector lever is tapped to position 

or 

. 

The transmission display indicates the 

current gear.
Selector lever in A/M

Switch between Automatic and Manual 

mode.
Selector lever in R

Reverse gear. Engage only when the 

vehicle is stationary. Press the button on 

the selector lever and select R. The 

transmission display will show "R". 
If R is selected when the vehicle is in motion, 

"R" flashes in the transmission display and 

no gear is engaged.