Vauxhall Combo Owner's Manual

Picture no: 13739s.tif

If the cause of the interruption to the power 

supply is not the discharged battery, 

consult a workshop. We recommend your 

Vauxhall Authorised Repairer. If the vehicle 

has to be removed from moving traffic, 

release clutch as follows:
1. Apply handbrake and switch off ignition.
2. Open bonnet and engage support.

3. Clean Easytronic around the cap 

(see figure) so that no dirt can get into 

the opening when the cap is removed.

4. Rotate cap to slacken and remove by 

lifting upwards – see figure.

5. Turn the adjusting screw clockwise using 

a flat-head screwdriver (vehicle tools 3 – 

see page 151) until clear resistance can 

be felt. The clutch has now been 

disengaged. 
Do not turn beyond the resistance, since 

this can damage the Easytronic. 

6. Fit cleaned cap again. The cap must be 

in full contact with the housing. 

Towing the vehicle and starting the engine 

is not permitted when the clutch has been 

released in this way, although the vehicle 

can be moved a short distance. 
Consult a workshop immediately. 

We recommend your Vauxhall Authorised 

Repairer.