Vauxhall Combo Owner's Manual

Flashing with the engine running indicates 

a fault that may damage the catalytic 

converter. You can continue to drive 

without causing damage by slowing down 

until the flashing stops and the control 

indicator Z is steady. Consult a workshop 

immediately. We recommend your 

Vauxhall Authorised Repairer. 

Picture no: 11718s.tif

Control indicator A for engine 

Illuminates for a few seconds when ignition 

is switched on. 
If it comes on when the engine is running, 

there is a fault in the engine or transmission 

electronics. The electronics switch to the 

emergency running programme, fuel 

consumption may increase and the 

driveability of the vehicle may be affected.
In some cases, the fault can be eliminated 

by switching the engine off and back on 

again. If control indicator A illuminates 

again when the engine is running, consult a 

workshop to have the cause of the fault 

remedied. We recommend your Vauxhall 

Authorised Repairer.

If it illuminates briefly, but does not recur, it 

is of no significance. 
Illumination of A can also indicate water 

in the diesel fuel filter 3. Have the diesel 

fuel filter checked for water - see page 184. 

We recommend that you consult your 

Vauxhall Authorised Repairer.
If it flashes after the ignition is switched on, 

there is a fault in the immobiliser system; 

the engine cannot be started - 

see page 45.