Vauxhall Combo Owner's Manual

Picture no: 12454s.tif

3

The spare wheel is stored beneath the 

floor.
1. Fully release the hexagon bolt in the load 

compartment floor using the wheel bolt 

wrench. Vehicle tools – see page 151. 

2. Lift the spare wheel holder. 

Picture no: 12455s.tif

3. Unhook the catch and lower the spare 

wheel. 

4. Detach the safety cable. 
5. Lower the holder fully and take out the 

spare wheel. 
Vehicles with a temporary spare wheel 3 

have a spacer ring between the 

temporary spare and the vehicle 

underbody. 

6. Wheel changing – see page 152. 

Picture no: 16493s.tif

7. Place the replaced wheel in the spare 

wheel holder with the outside of the 

wheel facing upwards.
If a full specification wheel is stowed, do 

not fit the spacer ring between the 

wheel and the vehicle underbody. 

8. Lift the spare wheel holder, insert the 

safety cable. 

9. Lift the spare wheel holder and engage 

in the catch. The open side of the catch 

must point towards the rear. 

10. Turn the hexagon bolt in the load 

compartment floor with the wheel bolt 

wrench to raise the spare wheel holder 

all the way up.