Vauxhall Combo Owner's Manual

Picture no: 15319t.tif

4. Screw the compressor air hose to the 

connection on the sealant bottle.

5. Fit the sealant bottle in the retainer on 

the compressor. 
Set the compressor near the tyre in such 

a way that the sealant bottle is upright. 

6. Remove the valve cap from the defective 

tyre.

Picture no: 15795t.tif

7. Screw the filler hose to the tyre valve.
8. The switch on the compressor must be 

set to §. 

9. Plug the compressor connector into the 

accessory socket or the cigarette lighter 

socket 3. Accessory socket – 

see page 71.

Picture no: 15796t.tif

10. Switch on ignition. 
11. Set the rocker switch on the compressor 

to I. The tyre is filled with sealant.

12. While the sealant bottle drains (approx. 

30 seconds) the pressure indicator on 

the compressor briefly points to 6 bar. 

Pressure then sinks again.

13. All of the sealant is pumped into the 

tyre. Afterwards, the tyre is filled with 

air.

14. The prescribed tyre pressure 

(see pages 205, 206) should be 

reached within 10 minutes. Switch off 

the compressor when the correct 

pressure is obtained.