Vauxhall Combo Owner's Manual
17
In brief
Manual transmission:
Reverse gear: with vehicle stationary,
pull the ring up three seconds after
depressing clutch pedal and engage gear.
If the gear does not engage, set the lever in
If the gear does not engage, set the lever in
neutral, release the clutch pedal and
depress again; then repeat gear selection.
Easytronic
3
:
N = Neutral / start position
o
= Driving position
(centre position)
+
= Higher gear
-
= Lower gear
A/M = Switch between
Automatic and
Manual mode
R = Reverse
(with selector lever lock)
To move the selector lever from N to R,
press the button on the lever.
Only start in N with footbrake applied.
6 Further information – see page 113.
Only start in N with footbrake applied.
6 Further information – see page 113.