Universal Remote Control INSIGHT M2067BX3 Leaflet

Page of 2
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Fold
Overview
The ON DEMAND Custom DVR 3-
Device universal remote will control up 
to three home entertainment devices, 
including a Digital Video Recorder 
enabled Cable Box.
The remote control requires installing 
two (2) new AA batteries (included) 
and some easy programming to con-
trol your devices.  For best results, 
please read and perform all instruc-
tions listed here. Also, keep this guide 
for future reference.
installing Batteries
1.  Pull back the remote control’s  
battery cover and remove it. 
2.  
Insert the two (2) supplied AA 
batteries according to the + and 
- marks in the battery case.
3.  Push the battery cover back into 
place.
4.  Test the unit by pressing any  
mode key (i.e., aUXtv, or 
Cable).  
If batteries are inserted correctly, 
the selected mode key will light.
NOTE: When batteries need replacement, 
the remote control will stop operating. 
Replace the old batteries and the unit will 
be restored to its full functionality, complete 
with your favorite settings.
 
FeatUres and 
FUnCtiOns
Use the remote control’s mode keys 
(i.e., aUX, tv, or Cable) to control 
a specific device. When pressed, the 
selected mode key will light, confirm-
ing your choice. Use the other keys to 
perform desired actions (see the fol-
lowing key chart). 
NOTE: The selected mode will remain 
active until you press another mode key.
 
Press aUXtv, or  
 
Cable once to select  
 
and control a device. 
 
 Press Power once to 
 turn on or off the  
 
selected home enter- 
 
tainment device. 
 
Use setup for all  
 
programming    
 
sequences.
 
Press all On once to  
 
turn on or off all  
 
programmed devices  
 
in this order: Cable,   
 
tv, and aUX. After  
 
all devices are on,  
 
Cable is the active  
 
mode.
 
Press On deMand  
 
once to access the ON  
 
DEMAND menu (not  
 
available in all areas).
 
 
In the aUX or tv  
mode, use the trans-
port keys to control a 
VCR, PVR, or DVD 
player. To record a 
program on a VCR,  
press reC twice.
 
In the Cable mode,  
 
use the keys to control  
 
ON DEMAND pro 
 
grams.
 
Press rePlaY to  
 
replay the previous  
 
few seconds of a pro 
 
gram.
 
Press My dvr to  
 
show a list of prog 
 
rams that  have been  
 
recorded.
 
Press LIVE to return  
 
to watching live TV.  
 
Use ABor C to  
 
access interactive  
 
functionality on your  
 
cable box.
  Use Page+ (or Page–)
  to page up (or down)
  
through menu screens  
 
and the interactive  
 
program guide.
  Use Guide to display
  the interactive  
 
program guide.
 
Use these keys to 
move the cursor in 
the interactive pro-
gram guide and menu 
screens.
 
Use OK (select) to  
 
select menu options,  
 
PPV events, and   
 
programs from the  
 
interactive program  
 
guide.
 
Use info to display
 
current channel and  
 
program information.
 
Use Menu to display
 
the Quick Menu (on a  
 
Motorola Cable Box),  
 
or to access settings  
 
(on a Scientific    
 
Atlanta Explorer,  
 
Pioneer Voyager, or  
 
PACE cable box).
 
Use exit to exit the
  menu or guide.
 
Use Help to access 
  digital cable help.
 
Use last to recall the
  last channel or go back  
 
one screen in the menu.
  Use vOl+ (or vOl-
 
to raise (or lower) the
  sound volume. Also  
 
see Changing Volume 
 
Lock.
 
Press Mute once to
  turn sound off or on.
 
In the Cable mode,
  press Fav once to  
 
display programmed  
 
favorite cable channels.
  Use CH+ (or CH-) to
  select the next higher 
(or lower) channel. 
 
When controlling a  
 
DVD player, use CH+  
 
(or CH-) to skip   
 
forward (or skip   
 
reverse) through   
 
video.
 
 
Use the keypad (0 ~ 
9)to directly select the  
channels (e.g., 09 or
 
031).
In the tv mode, use  
this key to switch the  
TV’s input to view TV  
or video programs.
 
In the aUX mode,  
 
use this key to switch  
 
the VCR, PVR (or  
 
DVR), or DVD player  
 
to view TV or video.  
 
For an audio device,  
 
use it to switch to an  
 
input source.
 
Use Hd/ZOOM    
 
to change the aspect  
 
Ration on HD    
 
Receivers.
 
Use the PIP Function 
keys to operate the 
PIP functionality of 
your converter and 
TV (If Available) 
PrOgraMMing deviCe  
COntrOl
The ON DEMAND Custom 3-Device 
universal remote control is prepro-
grammed at the factory to operate 
the Cable Box supplied by your Cable 
system, an RCA TV, and an RCA VCR 
(in the aUX mode). To control devices 
other than default brands (excluding 
the Cable Box), perform the below 
steps; otherwise skip this section:
1.  Turn on a device (e.g., VCR or 
DVD Player) and, if applicable,  
insert media, (e.g., video cassette or 
disc).
NOTE: Please read steps 2 to 6 com-
pletely before proceeding. Highlight or 
write down the codes and device you 
wish to program before moving on to 
step 2.
2.   On the remote control, press a 
device key once (i.e., aUX or tv). 
NOTE: Use the 
aUX
 key to program  
control of an Audio Amplifier or 
Receiver, a DVD Player, a Home-
Theater-In-A-Box Device, a PVR (or 
DVR), or a VCR. 
3.  Press and hold setup until the 
selected mode key blinks twice, 
then release setup
4.  Locate the code for your device 
in Manufacturer’s Codes on the 
back of this user guide. Brands are 
listed in alphabetical order with 
the most popular codes listed 
first. 
5.  Enter the first five-digit code for 
your device. If you perform this 
procedure correctly, the selected 
mode key will blink twice. 
NOTE: If you enter an invalid code, 
the selected mode key will display one 
long blink and exit the programming 
mode. Repeat steps 2 to 5 with a valid 
code.
6.  Aim the remote control at your 
device and press Power once. 
The device should turn off. If it 
does not respond, repeat steps 2 
to 6, trying each code listed for 
your brand until you find one 
that works. If it still does not 
work, try Searching For Your 
Code.
NOTE: If the device does not have a 
Power
 key, press the 
(
Play
) key. 
7.  For future reference, write your  
device code in the appropriate 
boxes below:
 
aUX Code
Device Type:______________
 
tv Code
8.  Repeat steps 1 to 7 for another 
device you want to control. 
searCHing FOr YOUr COde
If your home entertainment device does 
not respond to the remote control after 
trying all of the codes listed for your 
brand, or if your brand is not listed at 
all, try searching for your code. 
For example, after trying all of the 
codes for your TV, you still cannot get 
the remote control to operate your TV, 
then:
1.    Turn on your TV.
2.    On the remote control, press tv 
once. Then press and hold setup 
until the tv key blinks twice, 
then release setup.
3.    Enter 9 - 9 - 1. The tv key will 
blink twice.
4.  Press and release the digit 1.  The 
tv key will blink twice.
 
Note:  Substitute 1 with 0 if 
searching for a Cable code, 2 if 
searching for a DVD, VCR or 
PVR and 3 if searching for an 
Audio device
5.    Press Power and aim the remote 
control at the TV and press CH + 
one or more times until the TV 
turns off.
NOTE: In the search mode, the 
remote control will send IR codes 
from its library to the selected device, 
starting with the most popular code 
first.  
6.  Press setup once to lock in the 
code.The tv key will blink twice.
7.  To search for the codes of another 
device, repeat steps 1 to 5, but 
substitute the aUX key for the 
device you are searching for. 
CHeCKing tHe COdes
 
If you have set up the remote control 
using the Searching For Your Code  
procedure, you may need to find out 
which five-digit code is operating your 
equipment. Perform the following steps 
after setting up your devices to find 
out which five-digit code operates your 
equipment. For example, to find out 
which code is operating your TV:
1.    Turn on your TV.
2.    On the remote control, press tv 
once. Then press and hold setup 
until the tv key blinks twice, 
then release setup.
3.    Enter 9 - 9 - 0. The tv key will 
blink twice.
4.    To view the code for the first 
digit, press 1 once.  Wait 3 sec-
onds and count the number of 
times the TV key blinks (e.g., 3 
blinks =3) and write down the 
number in the left most TV Code 
box (at end of this section).  
NOTE: If a code digit is “0”, the 
selected mode key will not blink.
5.  Repeat step 4 four more times for 
the remaining digits. Use 2 for the 
second digit, 3 for the third digit, 
4 for the fourth digit and 5 for the 
fifth digit. Finish writing down the 
code in the TV Code boxes (at end 
of this section). 
6.  To check another device code, 
repeat steps 1 to 5, but substitute 
the aUX  key for the auxiliary 
device you are checking. Write 
down the codes in the appropri-
ate boxes below:
 
aUX Code
Device Type:______________
tv Code
CHanging vOlUMe lOCK
The ON DEMAND Custom 3-Device 
universal remote control is set at the 
factory to control the TV volume in all 
modes. 
However, you may change the Volume 
Lock setting to Individual Volume 
Unlock to unlock a specific device’s 
volume controls for independent 
operation in its own mode (e.g., Audio 
Receiver volume controls in the aUX 
mode).
Or, if desired, you can perform Global 
Volume Unlock so that the volume 
controls of all devices can be indepen-
dently operated in their own modes.
Unlocking volume Control For a 
single device (individual volume 
Unlock):
1.  Press a desired mode key where 
you want volume to be unlocked 
(e.g., aUX) and controlled within 
its own mode. 
2.  Press and hold setup until the 
selected mode key blinks twice, 
then release setup.
3.  Enter 9 - 9 - 3 and then press 
vOl- once. The mode key will 
blink four times confirming 
unlock.
4.  If desired, repeat steps 1 to 3 (of 
this section) for each device that 
you want volume to be unlocked.
5.  Now, after you select a device that 
has volume unlocked (e.g., aUX), 
pressing vOl+ vOl-, or Mute
will control the device’s volume 
only in its own mode.
Unlocking all volume Controls 
(global volume Unlock):
1.  Press and hold setup until the 
selected mode key blinks twice, 
then release setup.
2.  Enter 9 - 9 - 3 and then press 
vOl+ once. The mode key will 
blink four times confirming 
unlock.
3.  Now, volume controls for all 
devices can be independently  
controlled in their own modes.
locking volume Control to tv 
or aUX Mode:
1.  Press and hold setUP until 
the Red light flashes twice, then 
release setUP.
2.  Enter 9 - 9 - 3 (Red light will 
flash twice).
3.  Press and release either tv or 
aUX (Red light for selected 
device will flash twice).
reassigning deviCe KeYs
With the ON DEMAND DVR remote, 
you can easily decide what device you 
want to add under the AUX mode.
For example, to have the unit control 
a TV, a Cable Box, and second TV all 
you need to do is enter in the TV code 
as follows:
1.    On the remote control, press aUX 
once. Then press and hold setup 
until the aUX key blinks twice,  
then release setup.
2.    Enter 1-0-0-4-7
3.  The aUX key is now ready to be 
programmed for your second 
TV. See Programming Device 
Control for instructions.
PrOgraMMing CHannel 
COntrOl lOCK
By default, the remote control’s chan-
nel-control capabilities are locked to 
the Cable Box.  The affected keys are 
9CH+CH-enter, and last
This will guarantee that you do not  
inadvertently change a channel while 
in the TV mode. However, you can 
turn off this feature to allow full access 
to these keys in the tv and Cable 
modes.
NOTE: This feature does not affect the 
aUX
 
mode.
de-activating Channel Control 
lock
1.    On the remote control, press 
Cable once. Then press and hold 
setup until the Cable key blinks 
twice, then release setup.
2.    Enter 9 - 7 - 3. Press CH- once. 
The Cable key will blink four 
times.
3.   Now, the remote control will  
provide TV or cable channel  
control capabilities while in the  
tv or Cable mode.
re-activating Channel Control 
lock
1.    On the remote control, press 
Cable once. Then press and hold 
setup until the Cable key blinks 
twice, then release setup.
2.    Enter 9 - 7 - 3. Press CH+ once. 
The Cable key will blink twice.
 
3.  Now, regardless if you select 
the tv or Cable mode, only the 
channel control capability of your 
cable box will be accessible. 
trOUBlesHOOting
PROBLEM:   A mode key does not 
blink when you press a 
key.
SOLUTION:   Replace the batteries  
 
with two (2) new AA bat 
 
teries.
PROBLEM:   During programming, a 
mode key displays one 
long blink.
SOLUTION:   An invalid entry has  
 
occurred. Check the key  
 
to be entered and try  
 
programming again.
PROBLEM:  A mode key blinks 
when you press a key, 
but home entertainment 
component does not 
respond.
SOLUTION:   Make sure the remote  
 
control is aimed at your  
 
home entertainment  
 
device and is not farther  
 
than 15-feet away.
PROBLEM:  The remote control does 
not control home enter-
tainment devices or the 
commands are not work-
ing properly.
SOLUTION:  Try all listed codes for  
 
the device brands being  
 
set up.  Make sure they  
 
can be operated with an  
 
infrared remote control. 
Fold
On deMand 
Custom dvr 
3 device
User guide