Universal Remote Control M-855 User Manual
BIOS Setup
• 51
Suspend Type:
Select the Suspend Type.
The choices: PWRON Suspend, Stop Grant.
Suspend Mode:
When “Enabled” and after the set time of system inactivity. All devices except the
CPU will be shut off.
The choices: Enabled, Disabled.
HDD Power Down:
When “Enabled” and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
When “Enabled” and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
The choices: Enabled, Disabled.
CPU THER-Throttling:
Select the CPU THRM-Throttling rate.
The choices: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0% and 87.5%.
Wake-Up by PCI Card:
An input signal from PME on the PCI card awakens the system from a soft off state.
The choices: Enabled, Disabled.
Resume by Alarm:
When “Enabled”, your can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode.
The choices: Enabled, Disabled.
PM Events:
PM events are I/O events whose occurrence can prevent the system from entering a
power saving mode or can awaken the system from such a mode. In effect, the
system remains alert for anything, which occurs to a device, which is configured as
Enabled, even when the system is in a power down mode.
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ [A-D] #