Uniden AppCam 23 User Manual

20

3.  Before attaching the camera, tug gently on the stand to make sure it is 

securely in place.

1.  For each AppCam 23, attach the 

camera bracket to the mounting 
screw. You can attach the stand 
to the top or the bottom of the 
AppCam 23 as needed. Tighten 
it a few turns, then turn the 
AppCam 23 to face the direction 
you want. 

2.  Tighten the camera brace up 

against the AppCam 23 to 
secure it into place.

3.  Unlock the mounting post by 

turning the wingnut to the left a 
few turns.

4.  set the mounting post to the correct angle, then tighten the wingnut until 

the post is locked into place.

5.  After the AppCam 23 is installed, reconnect power.

Loosen the 

wingnut to 

unlock the 

mounting 

post.

Attach the camera 

to the mounting 

screw and turn it 

to the desired 

direction.

Adjust the post to 

the correct angle, 

then tighten the 

wingnut to lock the 

post into place.

Tighten the brace against 

the camera to

secure it

in place.