Universal Laser Systems X-600 User Manual

Specifications

Model Number

X-600 or X2-600

Resolution

1000 x 1000 DPI, 500 x 500 DPI, 333 x 333 DPI, 250 x 250 DPI

200 x 200 DPI, Draft

Computer Needed

Windows 95 or 98, PC compatible

Work Area

32” x 18” (812.8 mm x 457.2 mm)

Table Size

37” x 23” (939.8 mm x 584.2 mm)

Maximum Part Size

37” (939.8 mm) wide x 23” (584.2 mm) deep x 9” (228.6mm) tall

Laser Source(s)

15, 20, 25, 30, 35, 40, 45, 50 Quick Change Laser Cartridge

(X2-600 only)

15, 20, 25, 30, 35, 40, 45, 50 Quick Change Laser Cartridge (Laser #2)

Lenses Available

Focal Length / Spot Size / (Standard or Optional)

1.5” (38.1mm) / 0.003 inches (.08 mm) / Optional

2.0” (50.8mm) / 0.005 inches (.13mm) / Standard

2.5” (63.5mm) / 0.007 inches (.18 mm) / Optional

4.0” (101.6mm) / 0.013 inches (.33 mm) / Optional

Interfaces

Centronics parallel, RS232C Serial

Memory Buffer

Multiple and Single file storage modes, automatic data compression

Dimensions

38” high x 44” wide x 38” deep (965 x 1117 x 965mm)

Weight

approximately 320 lbs. (145 kg)

Safety

CO2 interlocked safety enclosure = Class I

Red Pointer Diode = Class IIIa

Available Options

Rotary Fixture, Air Assist, Honeycomb Cutting Table

Facility Requirements

Power (X-600)

Single Phase 110/220V AC, 15/8 Amp, 50/60 Hz

(X2-600)

Single Phase 220V AC, 8 Amp, 50/60 Hz

Exhaust

Outside exhausting required, two 4” connections,

500 CFM minimum (250 at each connection) at 6 inches static pressure

(425m

/hr at 1.5kPa)

Cooling

Air-cooled (ambient temperature 50ºF (10ºC) to 95ºF (35º C))

Specifications are subject to change without notice.