Zoom R24 User Manual

1

In this manual, symbols are used to highlight warnings and 

cautions that you must read to prevent accidents. The mean-

ings of these symbols are as follows:

Please observe the following precautions to ensure safe use 

of this unit.

Since the power consumption of this unit is high, we 

recommend using the AC adapter. When using batter-

ies, use either alkaline or nickel-metal hydride batteries.

•  Be sure to use only a DC5V/1A/center plus AC adapt-

er (ZOOM AD-14). Use of an AC adapter other than

that specified could damage the unit, cause malfunc-

tion or result in a fire or other trouble.

•  Connect the AC adapter only to an outlet that sup-

plies the rated AC voltage required by the adapter. 

Before using the R24 in other countries (or regions)

where  the  power  voltage  differs  from  AC  100  V,

always consult with a store that handles ZOOM prod-

ucts and use a suitable AC adapter. 

•  When disconnecting the AC adapter from an outlet,

always pull the body of the adapter itself. 

•  During lightning storms or when not using the unit

for an extended period of time, disconnect the AC 

adapter from the AC outlet.

•  Use six conventional 1.5-volt AA batteries

•  The R24 cannot recharge batteries.

•  Read battery labels carefully.

•  When not using the unit for an extended period of

time, remove the batteries from the unit.

•  If  a  battery  leak  should  occur,  wipe  the  battery

compartment and the battery terminals carefully to 

remove all battery residue.

•  Always close the battery compartment cover when

using the unit. 

Depending on the placement conditions of the unit, a

slight electrical charge might be felt when touching a 

metal part of the R24. If you wish to avoid this, ground

the unit by connecting an external ground to a screw on 

the rear panel. To avoid danger from electricity, never 

connect it to any of the following for grounding.

•  Water pipes (risk of electric shock)

•  Gas pipes (risk of explosion)

•  Telephone wiring grounds or lightning arrestors

 (danger during lightning strikes)

Avoid using the R24 where it might be exposed to the

following conditions that could cause it to malfunction.

• Extremely high or low temperatures

• Very high humidity or splashing water

• Excessive dust or sand

• Excessive vibrations

Never put vases or other items filled with liquids on the 

R24 as they could cause electric shock.

The R24 is a precision instrument. Do not put unneces-

sary pressure on the keys and other controls. Use of

excessive force and dropping or bumping the unit, for 

example, could cause the unit to break. 

Always turn the power OFF for all equipment before 

connecting  any  cables.  In  addition,  make  sure  to 

disconnect all connection cables and the AC adapter 

before moving the unit.

Never open the case or attempt to modify the product 

in any way since this could result in damage to the unit. 

Zoom Corporation will not take any responsibility for 

damage resulting from alterations to the unit.

Do not use the R24 at a loud volume for a long time.

Doing so could damage hearing.

In consideration  of safety,  the R24 has been designed  to

provide maximum protection against the emission of electro-

magnetic radiation from the device and to be protected from 

external interference. However, equipment that is very sus-

ceptible to interference or that emits powerful electromagnetic 

waves could result in interference if placed near the R24. If

this occurs, place the R24 and the other device farther apart.

With any type of electronic device that uses digital control, 

including the R24, electromagnetic interference could cause

malfunction, corrupt or destroy data and result in other unex-

pected trouble. Always use caution around other devices.

Use a soft cloth to clean the panels of the unit if they become

dirty. If necessary, use a damp cloth that has been wrung out 

well. Never use an abrasive cleanser, wax or solvent including 

alcohol, benzene and paint thinner.

If the unit becomes broken or malfunctions, immediately dis-

connect the AC adapter, turn the power OFF and disconnect 

other cables. Contact the store where you bought the unit or 

Zoom service with the following information: product model, 

serial number and specific symptoms of failure or malfunction, 

along with your name, address and telephone number. 

Except for personal use, unauthorized recording of copyright-

ed sources, including CDs, records, tapes, video products,

broadcasts, is prohibited. Zoom Corporation does not bear 

any responsibility for any consequences related to copyright 

law infringement.

 

The SD symbol and

SDHC symbol are trade-

marks.    Windows®/Windows  Vista®  are  trademarks  or

registered trademarks of Microsoft®.   Macintosh® and Mac 

OS® are trademarks or registered trademarks of Apple Inc. 

 Steinberg and Cubase are trademarks or registered trade-

marks of Steinberg Media Technologies GmbH Inc.   Intel® 

and Pentium® are trademarks or registered trademarks of 

Intel® Corporation.   AMD Athlon™ is a trademark or regis-

tered trademark of Advanced Micro Devices, Inc.

 All other trademarks, product names, and company names 

mentioned in  this documentation are  the property of  their  

respective owners. 

 All trademarks and registered trademarks mentioned in this 

manual are for identification purposes only and are not intend-

ed to infringe on the copyrights of their respective owners.

This symbol indicates explanations about extremely 

dangerous matters. If users ignore this warning and 

handle the device incorrectly, serious injury or death 

could result.

This symbol indicates explanations about dangerous 

matters. If users ignore this caution and handle the 

device incorrectly, bodily injury and damage to the 

equipment could result.