X-Micro IEEE 802.11b User Manual

 
 

22

PPPoE 

Click to select PPPoE support on WAN interface. There 
are user name, password, connection type and idle time 
settings need to be done. 

User Name 

If you select the PPPoE support on WAN interface, fill in 
the user name and password to login the PPPoE server. 

Password 

If you select the PPPoE support on WAN interface, fill in 
the user name and password to login the PPPoE server. 

Connection Type 

Select the connection type from pull-down menu. There 
are Continuous, Connect on Demand and Manual three 
types to select. 
Continuous connection type means to setup the 
connection through PPPoE protocol whenever this 
X-Micro WLAN 11b Broadband Router is powered on. 
Connect on Demand connection type means to setup the 
connection through PPPoE protocol whenever you send 
the data packets out through the WAN interface; there are 
a watchdog implemented to close the PPPoE connection 
while there are no data sent out longer than the idle time 
set. 
Manual connection type means to setup the connection 
through the PPPoE protocol by clicking the Connect 
button manually, and clicking the Disconnect button 
manually. 

Idle Time 

If you select the PPPoE and Connect on Demand 
connection type, fill in the idle time for auto-disconnect 
function. Value can be between 1 and 1000 minutes. 

MTU Size 

Fill in the mtu size of MTU Size. The default value is 
1400. Refer to 4.22 What is 

Maximum Transmission 

Uni

t (MTU) Size? 

Attain DNS 
Automatically 

Click to select getting DNS address for PPPoE support. 
Please select Set DNS Manually if the PPPoE support is 
selected. 

Set DNS Manually 

Click to select getting DNS address for Static IP support.

DNS 1 

Fill in the IP address of Domain Name Server 1. 

DNS 2 

Fill in the IP address of Domain Name Server 2. 

DNS 3 

Fill in the IP address of Domain Name Server 3.