Symmetricom XLi IEEE 1588 User Manual

2

5

1

In a network port session, rebooting the XLi terminates the network port session; open a new network 
port session when the XLi has finished rebooting. In a serial port session, the XLi displays text similar to 
the following example when the XLi has finished rebooting and is ready to receive additional commands:

>SYSTEM POWER ON SELF TEST RESULTS:

SERIAL LOOPBACK TEST PASSED.

RAM TEST PASSED.

PROG CRC TEST PASSED

NETWORK INTERFACE 192-8001      (c) 1998 - 2003 SYMMETRICOM

ALL RIGHTS RESERVED

FLASH FILE SYSTEM MOUNTED.

SOURCE FILE /config/truetime.conf BYTES READ: 1210

FILE SYSTEM REV #  1.80

SCAN_FOR_OPT_CARD BEGINS.

FOUND @ ADDR 30004000H, ID NUM= 86H

SCAN_FOR_OPT_CARD ENDS.

INSTALL_SMART_OPTIONS BEGINS.

FOUND GPS CARD; QTY=1, ID#=8013H.

INSTALL_SMART_OPTIONS ENDS.

QUERYING FOR SYMMETRICOM DEVICE. PLEASE WAIT...

SYMMETRICOM GPS DEVICE.

XLi

INITIALIZATION SUCCESSFULLY COMPLETED.

>

Use function F100 P to change a user password. In a network port session, F100 P changes the 
password of the user you logged in as; operator or guest. In a serial port session, F100 P changes the 
password of the operator user. 

Valid password size is from no characters to 64 characters. If more than 64 characters are entered, 
F100

P truncates the string to 64 characters. When selecting a password, use appropriate levels 

password security for the XLi’s operating environment. Examples include: 

•

Mixing random alpha and numeric characters

•

Avoiding words or word combinations that can be found in a dictionary

To change the user password, enter: