Symmetricom XLi IEEE 1588 User Manual

2

5

1

The following summary lists all the XLi functions, identifies the user interfaces from which each one is 
available, and provides a brief description of the function.

Available from: K = keypad, N = Network Port (Telnet), S = Serial Port, W = Web

Available
From

K,N,S,W Set the time offset for Standard and Local time

K,N,S,W Apply a 12 or 24-hour format to the Front Panel Display, to 

F8, F9, and F90.

K,N,S,W Set the time and date (when not already provided by a 

reference source)

K,N,W

Configure the main serial port settings

K,N,S,W Set the thresholds for each of the four time quality flags

K*,N,S

Lock keypad access to the XLi’s functions. (When locked, 
F6 is the only function available from the keypad.)

N,S

Output the time once-per-second (to the command line)

N,S

Output the time when triggered (to the command line)

N,S

Change the format of the time output by F8 and F9

K,N,S,W View the current estimated worst case time error

K,N,S,W View the XLi’s software version information

K,N,S,W Not supported.

K,N,S,W Not supported.

K,N,S,W Not supported.

K,N,S,W View the Latitude/Longitude/Altitude or geocentric X/Y/Z 

coordinates of one or more GPS antennas.

K,N,S,W Compensate for the delay caused by the length of the GPS 

antenna cable. (Use F52 to adjust timing outputs.)

K,N,S,W Compensate for the length of the distribution cable on J2.

K,N,S,W Operate specific GPS receivers in Time Mode for static 

applications, or in Dynamic Mode for mobile applications.

K,N,S,W View a list of current and tracked satellites.