Stinger Power Series 300-Amp Battery SPV20 Leaflet

Warning!!

Failure to read, understand and follow the instructions con -

tained in this owner's manual may result in you unintentionally

voiding your battery's warranty! Please contact your Stinger

dealer or Stinger

Tech Support with any questions concern -

ing these instructions prior to installing your Stinger

battery.

You have purchased the most technologically advanced bat -

tery available for the extreme demands of car audio. When

the POWER battery is properly installed and maintained it will

give you years of service. Some of the advantages you will

gain by using the POWER battery are:

· Greater amounts of power available on demand for your

audio system.

· Freedom to mount in any position without acid leakage.

· No terminal corrosion.

· Extremely fast recharge capability.

· More power per pound than any other battery.

Congratulations!

Important !

Do not throw batteries in the trash! Dispose of

batteries properly so that they will be recycled.

LIMITED WARRANTY: 12 - month Replacement

Stinger® a division of AAMP of America® (Seller), warrants its batteries to be free of defects in

material and workmanship. This warranty is effective for 12 months from the date of purchase

with original receipt, 12 months from manufacturer's shipping date code on battery if no origi -

nal receipt is available. Within the warranty period, the battery will be replaced free of charge

(shipping costs are not covered by warranty) if adjustment is necessary due to defect in material

or workmanship (not merely discharged). Simply return the battery to the authorized Stinger®

dealer where purchased with the original receipt for return to Stinger® for evaluation.

GENERAL PROVISIONS

A. Seller has no obligation under the limited warranty set forth above in the event the battery is

damaged or destroyed as a result of:

* willful abuse or neglect or if the top decorative cover has been removed.

* natural forces such as wind, lightning, hail; damage due to fire, collision, explosion, vandalism,

theft, penetration or opening of the battery case in any manner.

* overcharging, charging or installing in reverse polarity, improper maintenance or mishandling

of the battery such as but not limited to using the terminals for lifting or carrying the battery.

* failure to properly install the battery.

* normal deterioration in the electrical qualities or the acceleration of such deterioration due to

conditions that accelerate such deterioration.

* if the battery is used for an application that requires higher cranking power or a greater

reserve rating than the battery is designed to deliver or the battery capacity is less than the bat -

tery capacity specified by the vehicle manufacturer or the battery is otherwise used in applica -

tions for which it was not designed.

* use of the battery without its protective metal case.

* failing to properly maintain the battery in a charged state above 12.5 volts or not charging

battery with sufficient charge current as set forth in the charging instructions of this battery.

B. The following conditions will void warranty

1. Removal or alteration of the battery’s white shipping date code label located on the top of

battery.

2. Dropping the battery or striking the battery case or battery terminals with damaging force.

3. Overcharging the battery resulting in but not limited to swelling of the battery case which in

turn causes misalignment of the internal structure of the battery.

4. Undercharging the battery by not providing sufficient charging power by either lack of suf -

ficient voltage, amperage or both.

C. To Obtain Warranty Service:

1. Return battery to the authorized Stinger® dealer where purchased. If the original selling

dealer cannot be contacted, call 727-572-9255 ext.248 for return instructions.

2. If the battery is determined to be defective in material or workmanship under terms of this

warranty, it will be replaced.

THIS LIMITED WARRANTY IS IN LIEU OF, AND SELLER DISCLAIMS AND EXCLUDES, ALL

OTHER WARRANTIES, STATUTORY, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THAT

WOULD OTHERWISE BE IN EFFECT FOR LONGER THAN THE EFFECTIVE WARRANTY PERIOD.

SELLER'S EXCLUSIVE LIABILITY FOR BREACH OF WARRANTY SHALL BE TO REPLACE THE

BATTERY WITHIN THE EFFECTIVE WARRANTY PERIOD. IN NO EVENT SHALL SELLER BE

LIABLE FOR ANY LOSS OR DAMAGES OF ANY OTHER KIND, WHETHER DIRECT, INCIDENTAL,

CONSEQUENTIAL, EXEMPLARY, SPECIAL OR OTHERWISE NOR SHALL SELLER BE LIABLE FOR

ANY REMOVAL OR INSTALLATION EXPENSE, OR THE LOSS OF TIME OR PROFITS.

Some states do not allow limitation on how long an implied warranty lasts or the exclusion or

the limitation of incidental or consequential damages, so the above limitations may not apply to

you. This warranty gives you specific legal rights which may vary from state to state.

Warranty Statement

SPV20 - SPV35
SPV44 - SPV70

Owner’s Manual &

Instructions

13160 56th Court - Clearwater, Florida 33760

Phone: 727-572-9255 - Tech Support: Ext. 230

Fax: 727-573-9326

Stinger

Electronics

stingerelectronics.com

Installation Tips

Caution!

Always wear safety glasses and follow the safety guidelines below

when working around batteries:

Note: The terminal design on the POWER battery allows the direct

connection of GM style side mount battery terminals without modi -

fication.

1. Always disconnect the negative (ground) cable first when removing

batteries.

2. Connect the negative (ground) cable last when installing batteries.

3. Handle and Lift batteries with care. Ensure a good grip before lift -

ing.

4. Clean all vehicle cable ends and connectors with a wire brush or

emery cloth until shiny and free from oxidation or corrosion.

5. Inspect battery mounting area to be sure it is clean and free from

objects that could damage the bottom of the battery.

6. Replace any corroded connections or worn cables. Replace or

repaint any corroded hold-downs, shelves or trays.

7. If installing batteries in a sealed battery enclosure make sure to

route tubing from the battery enclosure to outside the vehicle and into

open air. In the event of a charging system malfunction, overcharging

may occur and the tubing will direct gases safely away from the pas -

senger compartment.

8. Use extreme caution when making cable connections to the bat -

tery. Extensive damage and dangerous sparks will occur if cables are

crossed.

9. Tighten connections to a snug fit (do not overtighten). Over-tight -

ening can damage the battery and VOID THE WARRANTY. Recheck

connections occasionally to ensure good connections.

10. If installing multiple batteries, make provisions to disconnect the

batteries from each other when not in use for extended periods of

time as a precautionary measure.

11. When using a multi-battery system, monitor the voltage of your

batteries often. If voltage drops below 11.9 volts then disconnect the

batteries from each other and test each battery individually for pos -

sible problems.