StarTech.com TV Mount SATDUP13 User Manual
Instruction Manual
7
Utility Options
1. Using the Navigation buttons, locate “HDD Duplicator 5. Utility” and press OK.
2. From the Utility options you can access different administrative configurations and
2. From the Utility options you can access different administrative configurations and
information. See the list below outlining the details of each option.
Note: The number 5 at the beginning of each option below represents the Utility
heading on the main menu, the numbers: .1, .2, .3, etc. indicate the option within
the Utility sub menu.
5.1 Show Disk Info
The function shows basic information from the drive connected to the source.
The function shows basic information from the drive connected to the source.
5.2 Update System
If an update to the device firmware is available on the StarTech.com product page,
If an update to the device firmware is available on the StarTech.com product page,
this option can be used to update the device. The steps below outline the steps for
executing a system update.
Note: A firmware update should only be done if recommend by StarTech.com.
The below steps should only be performed by advanced users. Please contact
StarTech.com Technical Support for assistance.
a) Format a blank hard drive with a 10GB FAT32 partition.
b) Download the firmware file from the StarTech.com Website, and place the file on the
a) Format a blank hard drive with a 10GB FAT32 partition.
b) Download the firmware file from the StarTech.com Website, and place the file on the
main directory of the new partition.
c) Connect the hard drive to the source port of the SATDUP13.
d) Using the Navigation Buttons locate “5.2.1 Update BIOS” and press ok.
e) The update will take place, and the on screen display will alert you upon
d) Using the Navigation Buttons locate “5.2.1 Update BIOS” and press ok.
e) The update will take place, and the on screen display will alert you upon
completion.