StarTech.com CONYX ECS0016 User Manual

Instruction Manual

99

 
Please Note: “/bin/config” commands can be combined into one com-
mand for convenience.

Serial Port Settings
To setup serial port 5 to use the following properties (denoted in bolded 
text), you would need to issue the following commands from the com-
mand line (denoted in italicized text):
Baud Rate: 115200 
  # /bin/config –-set=config.ports.port5.speed=115200
Parity: None 
  # /bin/config –-set=config.ports.port5.parity=None
Data Bits: 8 
  # /bin/config –-set=config.ports.port5.charsize=8 
Stop Bits: 1 
  # /bin/config –-set=config.ports.port5.stop=1
Flow Control: Software  
  # /bin/config –-set=config.ports.port5.flow=Software
 
The following command will synchronize the live system with the new 
configuration.
    # /bin/config –-run=serialconfig
 
Note that supported serial port baud-rates are ‘50’, ‘75’, ‘110’, ‘134’, ‘150’, 
‘200’, ‘300’, ‘600’, ‘1200’, ‘1800’, ‘2400’, ‘4800’, ‘9600’, ‘19200’, ‘38400’, 
‘57600’, ‘115200’, and ‘230400’.
Supported parity values are ‘None’, ‘Odd’, ‘Even’, ‘Mark’ and ‘Space’.
Supported data-bits values are ‘8’, ‘7’, ‘6’ and ‘5’.