StarTech.com CONYX ECS0016 User Manual
Instruction Manual
8
By default the ECS0016 LAN port auto detects the Ethernet connection
speed. However you can use the
speed. However you can use the
Media menu to lock the Ethernet to 10
Mb/s or 100Mb/s and to Full Duplex (FD) or Half Duplex (HD).
Click
4.
Apply. You will need to reconnect the browser on the PC /
workstation that is connected to the ECS0016, by entering
http://new
IP address .
System Services
The Administrator can access and configure the ECS0016 gateway using
a range of access protocols. The factory default enables HTTPS and SSH
access and disables HTTP and Telnet. The Administrator can simply dis-
able any of the services, or enable others.
a range of access protocols. The factory default enables HTTPS and SSH
access and disables HTTP and Telnet. The Administrator can simply dis-
able any of the services, or enable others.
Select the
System: Services option then select /deselect for the service
to be
enabled /disabled. The following access protocol options are avail-
able:
Please note: If you have changed the ECS0016 IP address, you may
need to reconfigure your PC/workstation so it has an IP address that is
in the same network range as this new address (as detailed in an earlier
note in this chapter).
need to reconfigure your PC/workstation so it has an IP address that is
in the same network range as this new address (as detailed in an earlier
note in this chapter).