StarTech.com CONYX ECS0016 User Manual
Instruction Manual
65
SNMP alerts
The Administrator can configure the Simple Network Management Proto-
col (SNMP) agent that resides on the console server, to send Alerts to an
SNMP management application:
The Administrator can configure the Simple Network Management Proto-
col (SNMP) agent that resides on the console server, to send Alerts to an
SNMP management application:
Select
1.
Alerts & Logging: SNMP.
Enter the SNMP transport protocol. SNMP is generally a UDPbased
2.
protocol though infrequently it uses TCP instead.
protocol though infrequently it uses TCP instead.
Enter the IP address of the SNMP Manager and the Port to used for
3.
connection.
connection.
Select the version being used. The console server SNMP agent
4.
supports SNMP v1, v2 and v3
supports SNMP v1, v2 and v3
Enter the Community name for SNMP v1 or 2c
5.
To configure for SNMP v3 you will need to enter an ID and
6.
authentication password and contact information for the local
Administrator (in the Security Name)
authentication password and contact information for the local
Administrator (in the Security Name)
Click Apply to activate SNMP
7.
Nagios Alerts
To notify the central Nagios server of Alerts, NSCA must be enabled
under
Nagios Alerts
To notify the central Nagios server of Alerts, NSCA must be enabled
under
System: Nagios and Nagios must be enabled for each applicable
host or port under Serial & Network: Network Hosts or : Serial Ports
Configure Alerts
The Alerts facility monitors the status of the console server and connect-
ed devices and when an alert event is triggered, an Alert message is then
ed devices and when an alert event is triggered, an Alert message is then