Sony SE366 User Manual

Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / device.fm / 13.11.2008

Sc

hablone 200

4_12

_27

ì

Connect the mains adapter cable to the 12 V DC 1A socket on the Gigaset SE366 
WLAN. 

ì

Plug the mains adapter into a mains socket. 

If you are using WPS (see page 13), you can connect wirelessly to other WLAN devices 
quite simply via the registration button.

ì

Press the registration button for at least two seconds on the device’s back panel to 
start WPS registration. 

ì

Within two minutes, activate WPS registration of the wireless network adapter on 
the PC. The client gets the security data for the Gigaset SE366 WLAN (SSID and 
pre-shared key) and is thereby registered. 

Only one client is allowed to register during a single registration phase. If the device 
indicates by means of the WLAN LED that more than one client has tried to register, and 
the desired client has not been registered successfully, an external device may have con-
nected to your WLAN. In this case, you should change the WPA-PSK key as quickly as pos-

Note:
Only use the mains adapter (12V DC 1A) that is supplied with the device.

WLAN LED display during WPS registration:
On (300 s)

WPS registration was successful.

Flashing slowly

WPS registration is in progress.

Flashing quickly

WPS registration was not successful.

Flashing quickly 
with interruption

More than one client tried to register.