Sony SE366 User Manual
29
The user interface
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
Selecting a language
The user interface can be presented in various languages. During the initial configura-
tion or after resetting the device to the factory settings, the user interface is displayed
in German (if the Web browser is also in German) or in English (for all other languages).
tion or after resetting the device to the factory settings, the user interface is displayed
in German (if the Web browser is also in German) or in English (for all other languages).
ì
Click Language at the top right above the Start screen.
ì
If you wish to change the preset language, select the required language from the
list.
list.
ì
Click OK to apply the setting.
You might have to load the file for the language you require. The files are either on the
CD-ROM or you can download other languages from the Internet and save them on your
PC. Follow the on-screen instructions on the user interface page.
Reboot the device to activate the change. Confirm the reboot in the dialogue field on
the screen.
Once the procedure is complete the start screen is shown again.
CD-ROM or you can download other languages from the Internet and save them on your
PC. Follow the on-screen instructions on the user interface page.
Reboot the device to activate the change. Confirm the reboot in the dialogue field on
the screen.
Once the procedure is complete the start screen is shown again.
Elements on the user interface
The user interface Web pages contain the following elements:
Log Off button
You will always find the Log Off button on the right above the user interface. If you click
Log Off, the session is terminated and the login screen appears again.
You will always find the Log Off button on the right above the user interface. If you click
Log Off, the session is terminated and the login screen appears again.
Help
Click the question mark to display explanations about the current
user interface screen.
user interface screen.
Buttons and symbols used by the wizards
The wizards use graphic symbols to show which steps you have
already carried out.
already carried out.
As soon as you have changed the configuration in a screen, you can activate the new
setting by clicking Next > at the bottom of the screen. The < Back button returns you to
the previous configuration step and Cancel returns you to the start screen.
setting by clicking Next > at the bottom of the screen. The < Back button returns you to
the previous configuration step and Cancel returns you to the start screen.