Sony SE366 User Manual
33
Basic Setup Wizard
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
ì
Select how Internet sessions are to be established via the Connection mode:
– Select Always on if the connection is to remain set up when the Gigaset SE366
– Select Always on if the connection is to remain set up when the Gigaset SE366
WLAN is switched on.
– Select Connect on demand if applications such as a Web browser or an e-mail
program are allowed to connect to the Internet automatically.
– In the Idle time before disconnect field, enter a period of time after which the
Internet connection is to close down automatically if no data is transmitted
(default setting: 3 minutes, range: 1 to 99 minutes).
This time setting only applies to the Connect on request option. A permanent
(default setting: 3 minutes, range: 1 to 99 minutes).
This time setting only applies to the Connect on request option. A permanent
connection is achieved using the Always on option.
– Select Connect manually if you always want to establish and end the connection
to the Internet manually. If you subscribe to a time-based service this will save
you high connection charges. How to establish a connection manually is
described on page 82.
you high connection charges. How to establish a connection manually is
described on page 82.
ì
Click Test Settings to check the Internet connection. The device will attempt to con-
nect to the Internet. Any existing Internet connection will be closed first.
You will find information about the test steps and results on the Internet Connec-
tion Test screen.
nect to the Internet. Any existing Internet connection will be closed first.
You will find information about the test steps and results on the Internet Connec-
tion Test screen.
PPPoE pass-through
PPPoE pass-through enables you to use an additional Internet connection (with another
service provider) from one PC. You can find detailed information about this on page 47.
PPPoE pass-through enables you to use an additional Internet connection (with another
service provider) from one PC. You can find detailed information about this on page 47.
ì
Activate PPPoE pass-through if you wish to use this function.
(Universal Plug & Play) can offer their own network services and automat-
ically use services offered on the network. You can find detailed information about this
on page 48.
on page 48.
ì
Activate UPnP if you wish to use this function.
ì
Click Next >.
Note:
Connection to the Internet is only possible if you have entered all the data of your
Internet provider correctly.
Connection to the Internet is only possible if you have entered all the data of your
Internet provider correctly.
Note:
If you subscribe to a time-based service, this option can result in high connec-
tion charges.
If you subscribe to a time-based service, this option can result in high connec-
tion charges.