Sony SE366 User Manual
80
Administration and status information
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / admin_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
Setting Idle time before log off
ì
Enter the period in minutes after which the configuration program is to be aborted
if no entry is made. The default setting is 10 minutes.
if no entry is made. The default setting is 10 minutes.
ì
Click OK to apply the settings.
Setting up Remote Management
Remote Management enables a PC that is not in your local network to be used to con-
figure the Gigaset SE366 WLAN with a standard Web browser. You can permit Remote
Management for one particular PC or for any PCs.
For security reasons, this function is only available if you have previously changed the
system password for your device (see page 79).
figure the Gigaset SE366 WLAN with a standard Web browser. You can permit Remote
Management for one particular PC or for any PCs.
For security reasons, this function is only available if you have previously changed the
system password for your device (see page 79).
ì
In the Administration menu, select System Management.
ì
Require secure connection (HTTPS)
Activate this function if you want to select the secure HTTPS protocol, which an
external PC can use to access the Gigaset SE366 WLAN.
If this is not the case, the HTTP protocol is used.
Activate this function if you want to select the secure HTTPS protocol, which an
external PC can use to access the Gigaset SE366 WLAN.
If this is not the case, the HTTP protocol is used.
ì
Select the On option for Remote Management if you wish to allow Remote
Management.
Management.
Note:
If you ever forget your System Password you will have to reset your Gigaset SE366
WLAN (see page 21). Please bear in mind that this will restore all the settings to the
factory configuration. The default password on delivery is admin.
If you ever forget your System Password you will have to reset your Gigaset SE366
WLAN (see page 21). Please bear in mind that this will restore all the settings to the
factory configuration. The default password on delivery is admin.