Sony MP595 User Manual
Rev 1.5 Jul.08
39
5: Configuring the Router
Functions
Functions
This chapter describes the router functions of the MP modem
and shows you how to configure the MP modem to use its
router capabilities.
and shows you how to configure the MP modem to use its
router capabilities.
The MP modem supports Network Address Translation
(NAT). NAT operation enables you to use the MP modem to
communicate with up to 10 devices on an Ethernet network
and up to 10 additional devices on a wireless access point
network.
(NAT). NAT operation enables you to use the MP modem to
communicate with up to 10 devices on an Ethernet network
and up to 10 additional devices on a wireless access point
network.
The following table summarizes the MP modem’s non‐NAT
and NAT modes.
and NAT modes.
Factor
Non-NAT mode
NAT mode
Number of devices
supported
One
Up to 10 over Ethernet and
another 10 over WAP
simultaneously
another 10 over WAP
simultaneously
VPN supported
Yes
IPSec NAT-T from R2.0.0 and
PPTP from R2.0.2
PPTP from R2.0.2
Interfaces supported
Serial
USB (laptop only)
Ethernet
Wireless access point (WAP)
USB (laptop only)
Ethernet
Wireless access point (WAP)
a
Ethernet
Wireless access point (WAP)
Wireless access point (WAP)
a
a.
Note: Watcher is not available when using the WAP interface.