Sony MP595 User Manual

Page of 88
Rev 1.5  Jul.08
 
45
6: Configuring the Wireless Access 
Point
This chapter describes how to use the MP 595 modem as a 
wireless access point. You can use the MP 595 as a wireless 
access point in either NAT or non‐NAT modes
1
Note:  This chapter only applies to the MP 595W.
Overview
By default the wireless access point is disabled. The main steps 
for configuring the MP modem wireless access point are:
Enable wireless access point.
Optional:
Change the password.
Set the SSID.
Set the security settings.
Enable NAT, if applicable. (See 
 for details.)
Note:  Watcher is currently not available over a WAP network. You 
can use Watcher over any Physical Interface to enable the WAP 
interface. 
Note:  If the Wi-FI is enabled and is in Non-NAT mode, the computer 
that is connected to the Wi-Fi can monitor cellular connection by using 
ethernet through the watcher.
1. Se
 for information on enabling and configuring NAT 
mode.