Sony MP595 User Manual

Page of 88
AirLink MP595 / MP595W Modem User Guide
54
 2130795
Before using the digital input/output lines, you must configure 
them as inputs or outputs.
Connector pinouts
The MP modem’s I/O port is a female DB15HD connector with 
eight active I/O pins:
Two (2) digital I/O pins.
Two (2) digital input pins.
Four (4) analog input pins.
There are also six reserved pins and one ground pin.
Figure 7-1:  Pinouts for a male DB15HD I/O cable (left) that connects to the MP 
modem’s female DB15HD I/O connector (right). Note that the two figures’ 
pinouts are mirror images of each other, since they plug into one another.
Port specifications
Note:  No more than 36 VDC 
should be applied to any I/O 
pins.
See “I/O port characteristics” on page 72 for the technical 
specifications of the I/O ports, including input voltages.
Digital input devices
Digital input devices are those that have only two states and 
send a signal to the MP modem in one of those states. An 
example of a digital input device might be a gun rack alarm 
that sends a signal to the MP modem any time the gun rack is 
open. Another example would be a panic button that sends a 
signal to the MP modem when it is pushed.
2. 
Reserved—do not connect
3. Digital Input/Output 1
4. Digital Input 3
5. 
Reserved—do not connect
6. 
Reserved—do not connect
7. Analog Input 2 
8. Analog Input 4
9. 
Reserved—do not connect
10. Ground (GND)
11. Digital Input/Output 2
12. Digital Input 4
13. 
Reserved—do not connect
14. Analog Input 1
15. Analog Input 3
 
    
1. 
Reserved—do not connect
1
6
5
11
10
15
DB15HD female connector
DB15HD male cable 
on rear of MP modem