Sony NEX-VG10 User Manual

Page of 95
26
GB
Sa
m
Me
nu
In
Shutter Priority
Allows you to manually adjust and fix the shutter speed. You can make a moving subject 
look still or emphasize the movement of a moving subject by adjusting the shutter speed.
• The 
 (Camera shake warning) indicator is not indicated in shutter speed priority mode.
• If you shoot an image with 1 second or slower shutter speed in still image recording mode, noise 
reduction (Long Exposure NR) will be done after shooting. You cannot do any further shooting during 
the reduction.
• If proper exposure cannot be obtained after the setup in still image recording mode, when you press the 
PHOTO button halfway down, the aperture value blinks. Although you can shoot as it is, resetting is 
recommended.
• The brightness of the image on the LCD monitor may differ from the actual image being shot.
• It is difficult to focus automatically at a lower shutter speed. Manual focusing with your camcorder 
attached to a tripod is recommended.
• When recording under fluorescent lamps, sodium lamps, or mercury lamps, the image may flicker or 
change colors, or may have horizontal bands of noise. You may be able to improve the situation by 
adjusting the shutter speed.
1 Press the control dial and select [Shutter 
Priority].
Or, MENU button 
t [Shoot Mode] t 
[Shutter Priority].
2 Turn the control dial and select a desired 
value.
3 Adjust the focus and shoot the subject.
The aperture is automatically adjusted to obtain proper 
exposure.
Shutter speed
Notes
z
Shutter speed
When a faster shutter speed is used, each frame of a moving 
subject such as a running person, cars, and sea spray appears as 
if they are stopped.
When a slower shutter speed is used, a trailing image of the 
movement of the subject is captured to make flowing image.