Sony Garage Door Opener RCP 920 User Manual
Menu Configuration and Basic Operation
56
Menu Configuration and
Basic Operation
Basic Operation
The RCP-920/921 provides menu operations for various
functions such as adjustments of system equipment.
functions such as adjustments of system equipment.
Basic operation
In the factory default condition, the first page of the paint
menu appears on the LCD panel when power is supplied.
During subsequent use, the last used menu page will
appear.
menu appears on the LCD panel when power is supplied.
During subsequent use, the last used menu page will
appear.
For information on how to switch from and to other menu
pages, see “Menu transition diagram” (page 59).
pages, see “Menu transition diagram” (page 59).
Paint menu
1
Display the menu.
The paint menu appears when power is supplied.
To call up other paint menu pages, press v or V on the
MENU UP/DOWN button in the paint control block.
To call up other paint menu pages, press v or V on the
MENU UP/DOWN button in the paint control block.
2
Set or adjust the item.
Turn the paint control for the respective setting to
adjust the value (or select a setting).
adjust the value (or select a setting).
Note
In the following cases, some items cannot be operated
from the paint menu.
from the paint menu.
1) Only when an SD function is assigned to either of the
spare buttons. You can assign an SD function to the
spare button in the SW ASSIGN menu of the
configuration menu.
spare button in the SW ASSIGN menu of the
configuration menu.
Configuration menu
1
Display the configuration menu.
Press the ENTER button once to go to the top page of
the paint menu.
Press the ENTER button again and hold it for at least
1 second. The top page of the configuration menu
appears.
the paint menu.
Press the ENTER button again and hold it for at least
1 second. The top page of the configuration menu
appears.
2
Go to the page with the item to be set.
Turn the right paint control to move the cursor to the
setting or adjustment item that you want to set, and
press the ENTER button. A display for the respective
setting appears. Use the v and V buttons as required
to move between pages.
setting or adjustment item that you want to set, and
press the ENTER button. A display for the respective
setting appears. Use the v and V buttons as required
to move between pages.
3
Select the item.
Turn the paint control to move the cursor to the item
and press the ENTER button. The cursor shape
becomes “?.”
and press the ENTER button. The cursor shape
becomes “?.”
4
Set or adjust the item.
Turn the right paint control to adjust the value (or
select a setting), and press the ENTER button. The
change becomes active, and the cursor shape returns to
“>.”
select a setting), and press the ENTER button. The
change becomes active, and the cursor shape returns to
“>.”
Note
For pages which contain a “SET” item, any changes
on the page will not become active until confirmed by
the setting procedure. To do this, move the cursor to
“SET” and press the ENTER button twice.
on the page will not become active until confirmed by
the setting procedure. To do this, move the cursor to
“SET” and press the ENTER button twice.
Button status
Unavailable items
ABSOLUTE button: Lit
WHITE
COLOR TEMP
DETAIL LEVEL
COLOR TEMP
DETAIL LEVEL
ABSOLUTE button: Lit
FLARE button: Out
FLARE button: Out
BLACK
ABSOLUTE button: Lit
FLARE button: Lit
FLARE button: Lit
FLARE
ABSOLUTE button: Lit
SD button: Out
SD button: Out
1)
DETAIL LEVEL
ABSOLUTE button: Lit
SD button: Lit
SD button: Lit
1)
SD DETAIL LEVEL