Sony CD-R/RW User Manual

Please refer to CD-RW formatting software/CD manual for instruction on
software installation. CD-RW formatting software must first be properly
installed in order to write CD’s with this device.

●

Do not store the disc in a location subject to:
– high humidity
– high temperature
– excessive dust
– direct sunlight

●

Only hold disc by its edge. Do not touch the record surface.

●

Do not wipe CD-R/RW discs before recording data.
To avoid scratching the recording surface, blow away dust using an air 
blower.

Software Installation/Using Discs      15

Now let us review the hardware installation process, assuring that:

●

All connectors are properly connected.

● 

Each SCSI device has its own unique SCSI ID number.

● 

The last physical SCSI device on the bus is properly terminated.

●

Red edge of 50 pin flat SCSI cable must be on pin 1 of host adapter.

●

The following is a sample configuration of CD-RW installation.

Carefully replace computer cover, per Owner’s Manual.
Hardware installation is now complete!

14      Hardware Installation

1

49

50

Red Edge

0 1 2

AUDIO OUT

R GND L

INTERFACE  CONNECTOR

DC  INPUT

5V

±

5% GND 12V

±

10%

ACTIVE TERM
TEST
ID SELECT

1

2

49
50

CD-R/W Drive

Power
Supply
Cable

Red Edge

SCSI Card
(Not included)

Speakers
(Not included)

Sound Card
(Not included)

Audio Cable
(included)

SCSI 

Cable

(Not included)