Sony MULTI CHANNEL AV RECEIVER STR-DG710 User Manual

Page of 80
66
GB
Changing the display
You can check the sound field, etc., by 
changing the information on the display.
Be sure to use the buttons on the receiver for 
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display 
changes cyclically as follows.
All inputs except the FM and AM 
band
Index name of the input
a)
 
t Selected input 
t Sound field currently applied
FM and AM band
Program Service name
b)
 or preset station 
name
a)
 
t Frequency t Program Type 
indication
b)
 
t Radio Text indication
b)
 
Current Time indication (in 24-hour system 
mode)
b)
 
t Sound field currently applied
a)
Index name appears only when you have assigned 
one to the input or preset station (page 57, 65)
Index name does not appear when only blank 
spaces have been entered, or it is the same as the 
input name.
b)
During RDS reception only (models of area code 
CEL, CEK only) (page 58).
Note
Character or marks may not be displayed for some 
languages.
Using the Sleep Timer
You can set the receiver to turn off 
automatically at a specified time.
Press SLEEP repeatedly while the 
power is on.
Each time you press the button, the display 
changes cyclically as follows:
2-00-00 
1-30-00 
t 1-00-00 t 0-30-00 
t OFF
When sleep timer is activated, the display 
dims.
Note
If you press any buttons on the remote or receiver 
after the display dims, the display brightens up. 
After a while, the display dims again if no button is 
pressed.
Tip
To check the remaining time before the receiver 
turns off, press SLEEP. The remaining time appears 
on the display. If you press SLEEP again, the sleep 
timer will be canceled.