Sonos ZonePlayer ZP100 User Manual
Sonos ZonePlayer ZP100 Setup Guide
12
ZP100 Rear Panel Connectors
Ethernet switch connectors (4)
Use Category 5 Ethernet cable to connect to a router,
computer, or additional network device such as a
network-attached storage (NAS) device.
LED indicators:
computer, or additional network device such as a
network-attached storage (NAS) device.
LED indicators:
•
Green (link connection)
•
Flashing Yellow (network activity)
Right speaker terminals
Use high-quality speaker wire to connect the right
speaker to the ZonePlayer.
speaker to the ZonePlayer.
Left speaker terminals
Use high-quality speaker wire to connect the left speaker
to the ZonePlayer.
to the ZonePlayer.
Voltage select
115V/230V
Select the appropriate voltage setting for your country.
AC power (mains) input
Use the supplied power cord to connect to power outlet.
Analog audio out (fixed/variable)
You may use a standard RCA audio cable to connect the
audio inputs on a separate audio component such as an
amplifier or your home theater receiver, to the
ZonePlayer’s analog audio outputs.
audio inputs on a separate audio component such as an
amplifier or your home theater receiver, to the
ZonePlayer’s analog audio outputs.
Ethernet
switch
connectors
Right speaker
terminals
Left speaker
terminals
Voltage select
115V/230V
AC power (Mains)
input
Analog audio inputs
Analog audio outputs
Subwoofer output