Snell Acoustics K7 Leaflet

Page of 1
Snell Signature Series loudspeakers - K7
Is Bigger Always Better?...Can Speakers Be Beautiful
The Snell Series 7 loudspeakers reveal the
depth, impact and nuance in every music and
movie soundtrack without the obtrusive look 
and placement conflicts of typical speakers.
Handcrafted in Massachusetts from real wood
and solid aluminum, the elegant Series 7 with its
soft lines and superb finish plays perfect host to
the technology inside.
K7 Style and room architecture play a bigger role
in home entertainment decisions than ever
before.The smallest of the Series 7,the K7 is
designed to perform,regardless of placement,and
integrate with most decor. Based on newly
developed, high performance drivers from
SEAS,and (quite) a bit of magic from Snell ’s chief
engineer, Joe D ’Appolito Ph.D., the K7 betters its
award winning predecessor, the K.5mk2,in half
the physical size. Fine tuned with an individually calibrated crossover, the shoe-box sized K7
plays music and movies at concert hall levels, with startling dimension and clarity.
Design:  
Bass Reflex Monitor
with Rear Port
(port requires 1.5" to back-wall)
Frequency Response
54Hz-20kHz ± 3dB
77Hz-20kHz ± 3dB
@ 12dBOctave w/ Port Plug 
Sensitivity
[1 Watt (2.83v) @ 1m]
87 dB
Impedance
Nominal 8 Ohms
Maximum Output
105 dB
Recommended Power
50 Watts minimum
150 Watts maximum
Tweeter
1-inch SEAS silk dome
Woofer
5.25-inch SEAS Treated Paper, 
5 mm Excursion
Video Shielding
Yes
Crossover Frequency
2.5 kHz
Crossover
Discrete Tweeter and Woofer 
circuit boards. Time alignment and
coherency are achieved through
the transition region from driver to 
driver. Each crossover is
individually tuned by our
technicians  to ± 0.5db of the
Master Reference.
Boundary compensation
"Normal" – When placed on
stands away from wall.
"Boundary"– When placed on
shelf or near wall.
Wiring
Bi-amp, bi-wire ready
Connections
5-way, satin nickel-plated, brass
terminals. Accepts 5/16's
spades, pins, banana plugs and
bare wire to 12 gauge.
Cabinet Construction
Hardwood veneer over 5/8-inch
MDF Panels. Full length brace
with integrated port flare.
Radiused 1.25-inch satin-black
MDF baffle.
End Caps
1/4" inch aluminum, 
anodized black
Grille
Perforated Steel with black 
powder-coat paint.
Finishes
Hand-sanded natural Cherry.
Black-painted Walnut. Can 
be ordered in most wood 
and paint finishes.
Weight
17 lbs. 
Manufactured in the USA by Snell Acoustics, Peabody MA 01960 •  www.snellacoustics.com •  978-538-6262 •  © Snell Acoustics, Inc • All specifications subject to change without notice.
K7
Premier Series
Like all Snell loudspeakers, each K7 is hand tuned for natural imaging and sonic depth.
Dimensions:
12” High
7” Wide
10.5” Deep
Application Alternatives:                System Suggestions:
Basis150 Subwoofer
IW-K7 In Wall
CR7 Center SR30 Surround