Solid State Logic CSB 120 Leaflet

COMMERCIAL

For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com

SOLID.STATE.

SANDBLASTER

COMMERCIAL ELECTRIC WATER HEATERS

FEATURES

ADVANCED ELECTRONIC CONTROL -

 Plain English text and animated icons 

display detailed operational and diagnostic information. Fault or Alert messages appear 
if an operational issue occurs. Immersion temperature control adjustable through a 
range of 90°F to 190°F.

ECONOMY MODE OPERATION

 - Control system automatically lowers the 

Operating Set Point by a programmed value during user-defined time periods. Helps 
reduce operating costs during unoccupied or off - peak demand periods.

LINEAR SEQUENCING -

 Banks of heating elements (3 elements per bank) are 

energized according to adjustable (1 to 20°) differential set points for each bank. First 
bank on is the last bank off. Helps reduce current surge and provides accurate water 
temperature control.

GOLD ELEMENTS -

 CSB models ship with the gold plated elements (see element 

availability chart on back). Patented elements provide long life and superior scaling 
resistance. Low watt density means lower surface temperature to minimize scale buildup 
and more surface to heat water. Gold elements carry a one-year warranty against failure 
due to lime scale buildup.

GLASSLINED TANK -

 Three sizes: 50, 80 and 119-gallon capacity. Tank interior is 

coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034 
kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is 
vermin proof.

FUSING -

 Protects all elements, thermostats, and internal wiring circuits against excess 

current flow. Meets National Electrical Code requirements that non-ASME tanks must 
have internal fusing when current draw exceeds 48 amps.

STANDARD VOLTAGES -

 208, 240 and 480V single-phase and three-phase delta. 

Convertible from three-phase to single-phase (in field) and vice versa. 277V single-phase 
also available.

TERMINAL BLOCK -

 Factory installed. Just bring the service to the heater and 

connect to block.

MAGNETIC CONTACTORS -

 Heavy duty, UL rated 100,000 cycles.

OTHER STANDARD FEATURES -

  

Immersion style thermostats  

  

Simplified circuitry, color coded for ease of service  

  Two anode rods for maximum corrosion protection     Cabinet has bonderized 

undercoat with baked enamel finish     Bottom inlet and top outlet openings     Brass 
drain valve     CSA certified and ASME rated T&P Relief Valve     Single panel control box 

 THREE YEAR LIMITED TANK WARRANTY - For complete warranty information, 

consult written warranty or contact State Water Heaters.

OPTIONS -

 UL listed conversion kits to adjust voltage and kW requirements in the field before 

and after installation    ASME 150 psi tank construction   International voltages - 220, 
380, 400, 415, 575, and 600 volts, three phase available with Y connected  elements   
MANIFOLD KITS - for multiple tank installations. Two heaters -part # 9003429205, three 
heaters- part # 9003430205 and four heaters- part # 9003431205

Revised May 2011

 

8

0

6

0

0

S

S

E

C

S

231451_SCESS00608.indd   1

11/29/10   2:52 PM

■

■

■

■

■

■

■

■

■

■

■

■

■

iCOMM™ compatible and can be monitored from remote locations. Call 1.888.WATER02
for more information.

■

Low Lead Content

236828_SCESS00608.indd   1

5/27/11   9:47 AM