Socket Mobile 7 User Manual
STEP 2: Charge the Scanner
Use the included AC adapter to charge the Cordless Hand Scanner. The
scanner’s NiMH batteries must be charged for at least 4 hours before the
first use. The Battery Status LED will emit a solid red light while charging,
and turn off when the batteries are fully charged.
scanner’s NiMH batteries must be charged for at least 4 hours before the
first use. The Battery Status LED will emit a solid red light while charging,
and turn off when the batteries are fully charged.
WARNING: Do not attempt to charge alkaline batteries —
this may cause alkaline batteries to leak and damage the
CHS.
The red Battery Status LED will not function properly if
standard AAA alkaline batteries are being used.
this may cause alkaline batteries to leak and damage the
CHS.
The red Battery Status LED will not function properly if
standard AAA alkaline batteries are being used.
STEP 3: Uninstall Other Scanning Software
Delete any bar code scanning software already on your computer.
1. Make sure the bar code scanning software is closed.
2. Click Start | Control Panel | Add or Remove Programs.
3. Select the bar code scanning software and click Remove.
4. Follow the instructions on your screen to remove the software.
2. Click Start | Control Panel | Add or Remove Programs.
3. Select the bar code scanning software and click Remove.
4. Follow the instructions on your screen to remove the software.
40