Socket Mobile CF 10/100 User Manual
STEP 4: Insert Card and Connect to LAN
1. If you have not done so already, soft reset
your device.
2. Insert the Rugged CF 10/100 Card into your
device right-side up, with the blue label on
top.
top.
If inserting the Rugged CF 10/100 Card into a
PC Card slot, use a PC Card adapter (not
included).
PC Card slot, use a PC Card adapter (not
included).
3. Plug the connector into a LAN port
If you would like to check whether you have a good connection, do
the following:
the following:
• Check the Socket Ethernet icon at the bottom of the Today screen.
If it has a green square on the top left, there is a good
connection.
connection.
• Verify that the connection has a valid IP address for your network.
a) Tap on the Socket Ethernet icon to open the applet. In the
pop-up menu, tap Status.
b) In the Status screen, check the IP Address field.
− If your network uses a static IP address, make sure it
appears correctly.
− If your network uses DHCP, make sure the IP address is
within the valid range for your network. Consult with
your network administrator.
your network administrator.
• Test your web access. Start Pocket Internet Explorer. Enter a
URL and test to see if the website appears correctly.
If you cannot enter a URL because the address bar does not
appear, tap View and select Address Bar.
appear, tap View and select Address Bar.
CHAPTER 2: INSTALLATION
13