SMART Technologies AIRLINER WIRELESS SLATE WS100 User Manual

20

99-00666-20 B0

The first time you connect the AirLiner slate to a computer, you must create a wireless connection 
using the software included with your Bluetooth USB adapter or your computer’s built-in Bluetooth 
wireless support.

The procedure to wirelessly connect the AirLiner slate to your computer varies, depending on 
whether you use a Bluetooth USB adapter or your computer’s built-in Bluetooth wireless support. If 
you require further information, in addition to the following procedure, refer to the instructions that 
came with your adapter (if you’re using a Bluetooth USB adapter) or your computer (if you’re using 
your computer’s built-in Bluetooth wireless support).

NOTE: The use of wireless devices is regulated in most countries. If you travel with your AirLiner 
wireless slate, check with the appropriate regulatory authority for information about restrictions 
that apply in your country of destination. 

When regulations require that wireless devices be turned off—for example, on a 
commercial aircraft—turn off the AirLiner slate and ensure that it cannot be 
accidentally turned on.

Do not use the AirLiner slate in a facility control system or environment that 
requires high reliability, or where the use of wireless devices can cause 
interference. The slate can interfere with, or cause, other electronic devices to 
malfunction, and other wireless devices can interfere with, or cause, the AirLiner 
slate to malfunction.

Where its use is prohibited, turn off the slate to prevent it from interfering with other 
electronic devices or causing other electronic devices to malfunction. SMART 
Technologies does not accept liability for direct or consequential damages.