SimpleTech ZeusIOPS User Manual

Zeus

IOPS

 3.5-Inch Fibre Channel Solid State Drive Product Manual Rev. 1.0

19

This section discusses issues related to the FC-AL ports and loop addressing of the Zeus

IOPS

 3.5-

inch Fibre Channel SSD. This section also provides a table of the SCSI commands

implemented on 

the Zeus

IOPS

 3.5-inch Fibre Channel SSD, followed by subtopic discussing the use of each 

command.

This section discusses the implementation of the Fibre Channel Arbitrated Loop (FC-AL) specific to 
the Zeus

IOPS

 3.5-inch Fibre Channel SSD.

This section discusses issues relating to the installation of the SSD in a server or other enclosure, 
including cooling and grounding.

This section provides an overview of the marking, approval, documentation and reporting 
conventions for the Zeus

IOPS

 3.5-inch Fibre Channel SSD.

This section discusses various standards for electronic products, and how those standards apply to 
the Zeus

IOPS

 3.5-inch Fibre Channel SSD.

The Zeus

IOPS

 3.5-inch Fibre Channel SSD is intended for installation by the user in an appropriate 

enclosure, i.e., a server or alternate enclosure. The enclosure must be designed so that the use of 
the drive does not impair nearby electronic equipment within the same enclosure and external to the 
enclosure.

The user is responsible for choosing, designing and testing the enclosure so that it is appropriate as 
previously defined, and complies to related regulations, such as Subpart B of Part 15 of FCC Rules 
and Regulations, and the Radio Interference Regulations of the Canadian Department of 
Communications.