SimpleTech ZeusIOPS User Manual
38
Zeus
IOPS
3.5-Inch Fibre Channel Solid State Drive Product Manual Rev. 1.0
FCP-SCSI C
OMMANDS
S
UPPORTED
SCSI C
OMMANDS
Table 12 summarizes the SCSI commands supported by the Zeus
IOPS
SSD. Command queuing is
supported with all tag types (Head of Queue, Ordered Queue and Simple Queue). A maximum of 256
commands may be queued against each fibre channel port. This section only provides an overview
of the SCSI commands supported by the Zeus
commands may be queued against each fibre channel port. This section only provides an overview
of the SCSI commands supported by the Zeus
IOPS
SSD. For more information, please consult the
SCSI specification, Fibre Channel Protocol - 3 (FCP-3), Project T10/1560D, ANSI INCITS 416-2006.
Table 12.
Supported SCSI Commands
NOTE: Linked SCSI commands are not supported. NACA
does not apply to the Fibre Channel standard. As a result,
all the Control bytes of all the commands are ignored.
Command Code
Command Name
A0h
Report Luns
00h
Test Unit Ready
08h
Read (6)
0Ah
Write (6)
12h
Inquiry
Vital Product Data Page (00h)
Unit Serial Number Page (80h)
Device Identification Page (83h)
Unit Serial Number Page (80h)
Device Identification Page (83h)
16h
Reserve (6). Obsolete, but supported.
17h
Release (6). Obsolete, but supported.
1Ah
Mode Sense (6)
1Dh
Send Diagnostics Page
4Dh
Log Sense
25h
Read Capacity
28h
Read Extended (10)
2Ah
Write Extended (10)
2Eh
Write and Verify (10)
2Fh
Verify (10)
3Bh
Write Buffer
35h
Synchronize Cache (10)
5Ah
Mode Sense (10)